1 Attachment(s)
Drive Hitachi Seiki VK45 II
Good morning,
I have a problem with the servo driver of my VK45. The servo driver is by NEC 193-230072.
The problem is that the previous owner has burned a mosfet, and replaced it with a compatible and not with an equal.
Now unfortunately do not remember the original mosfets code.
I ask if anyone has a similar car if you can not read the letters written on the component.
I tried the online drive sheet date, but have not found anything
So the mill work some days, and then i have to change the mosfet again (I think because the features are slightly different)
http://www.cnczone.com/forums/attach...d=338050&stc=1
Thank you
Re: Drive Hitachi Seiki VK45 II
Hello,
what you need is
NEC K831 - check for the datasheet here and find one that is compatible if need be
2SK831 Datasheet(PDF) - NEC
John
Quote:
Originally Posted by
firstreal
Good morning,
I have a problem with the servo driver of my VK45. The servo driver is by NEC 193-230072.
The problem is that the previous owner has burned a mosfet, and replaced it with a compatible and not with an equal.
Now unfortunately do not remember the original mosfets code.
I ask if anyone has a similar car if you can not read the letters written on the component.
I tried the online drive sheet date, but have not found anything
So the mill work some days, and then i have to change the mosfet again (I think because the features are slightly different)
http://www.cnczone.com/forums/attach...d=338050&stc=1
Thank you
Re: Drive Hitachi Seiki VK45 II
Re: Drive Hitachi Seiki VK45 II
HI
*I have a hitachi seiki vk45 vmc Ladder corrupted*and no backup and no softwarecan you please*help me([email protected])