Esprit and Citizen Cincom L20E VIII
Hello everyone,
It's been a month since I started work in new company and I've been trying to make my first piece using Esprit on a Cincom L20. Is there anyone out here that can help me with a problem. I'm stuck at swapping the piece from Spindle 1 to Spindle 2. I've been using the Esprit options of Bar-feed>Pickup>Cutoff>Park but I must be doing something wrong because the machine is doing different moves, that are not in Esprit. We are using licensed Esprit and post-processor but it's all **** coming out.
If there's anyone who is using Esprit with a Swiss type machine, HELP!
You can contact me via email: [email protected] or by phone: 0040736535345
Thank you!
Re: Esprit and Citizen Cincom L20E VIII
Here's a sample of a simple FACE, TURN & CUTOFF off an L20 Swiss.
1 Attachment(s)
Re: Esprit and Citizen Cincom L20E VIII
Ok, I got the files to attach in a WinZip file. The Program (.NC) I posted and the Esprit (.esp) file. This does a simple face, turn and cutoff.
Re: Esprit and Citizen Cincom L20E VIII
Hello gays can you send me the post processor esp file to my email [email protected] . Thanks
Re: Esprit and Citizen Cincom L20E VIII
Re: Esprit and Citizen Cincom L20E VIII
i could help here's a simple simulation
Re: Esprit and Citizen Cincom L20E VIII
Hello cbr_speedster can you send me the post processor esp file to my email [email protected] . Thanks
Re: Esprit and Citizen Cincom L20E VIII
Hi
cbr_speedster can you please send me the post processor esp file to my email much appreciated.
[email protected].
Thanks
Re: Esprit and Citizen Cincom L20E VIII
me gustaria me ayuden con el post [email protected]
Re: Esprit and Citizen Cincom L20E VIII
Helllo, can anyone send me the post processor please .
[email protected]
Thanks in advance.
Re: Esprit and Citizen Cincom L20E VIII
Can you send a esprit citizen post processor as well please? [email protected]