Have Space in Container for CNC Machine and/or Laser

I have used CNC machines for 15 years now and I've imported 5 CNC machines (and two laser cutters) from the folks at Home | Jinan Unique CNC Equipment Co.,Ltd UniqueCNC. I am ordering two new CNC machines and a laser cutter for a new facility and have about 1/3 of the space in the container (40DC) for another CNC machine or a few laser cutters. I've "sold" the additional space in the container to other people in the past (references if you want them) when I import and you are only responsible for paying your associated costs. This is MUCH, MUCH cheaper and safer than a partial (LCL) order. A typical three-spindle, hybrid servo, Mach3 based, 4x8 machine is around $8,000 USD. Of course the Chinese will build anything you want with your choices of size, hardware, colors, spindles, VFDs, voltage/phase, etc, etc.

Here are the requirements:

You will need to be in the Houston area
On-water time is 32 to 35 days from China to the Port of Houston
I expect our order to complete around mid-July, with a mid-August arrival date in Houston. So you MUST act quickly to make this sailing date.
You must order from Unique CNC so there is not a multi-factory pickup charge.
You must pay Unique CNC directly - we don't care what you order (options, features, color, etc) as long as it fits into the available space in the container. If you want a CNC and laser, they can usually be stacked.
We are not responsible for any damage between the factory, in-transit or unloading. In all the years I've imported, this has never been an issue.
You will be responsible for the flatbed transportation fee from our warehouse where the container drops in Spring, TX (north Houston). This is usually around $350 to $500 depending on distance. I can recommend someone if you like. They will deliver your CNC machine directly to your shop/garage on a tilt bed and can often nudge it right into place.
Full payment for the prorated cost of your items based on floor space used in the container, is due at pickup. This includes clearance, port fees, on-water feeds, drayage to and from the ports and the misc other fees. Typically this is around $2,000 or less. I can provide you with a prior invoice. Payment is via cashiers check or cash only.
Full payment for the tariffs assessed at the time of the landing at the port of Houston and paid at pickup. I have no control over trump and tariffs could range from 3% (normal) to 28%+ (trump).
You do not need a US customs bond. I import 1MM+ in products from China each year over the last 7 years and have extensive experience on importing from China - I am not a rookie.

Here are some posts from my old, older machine: https://www.cnczone.com/forums/chine...14204-cnc.html - they have made a number of improvements since then.

Have Space in Container for CNC Machine and/or Laser - Must be in Houston, TX Area