Re: Fanuc 180i won't boot
Do you have any alarm shown in the CNC ?
Regards
AlexFanuc
Re: Fanuc 180i won't boot
the leds from the mainboard will tell you what kind of problem you have on the boot sequence.
if the cnc is on the back of your screen look on the left lower side for 6 leds and the sequence of leds will tell the problem
same if the cnc is stand alone and is on electrical cabinet
Re: Fanuc 180i won't boot
Quote:
Originally Posted by
zavateandu
the leds from the mainboard will tell you what kind of problem you have on the boot sequence.
if the cnc is on the back of your screen look on the left lower side for 6 leds and the sequence of leds will tell the problem
same if the cnc is stand alone and is on electrical cabinet
In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.
Re: Fanuc 180i won't boot
Quote:
Originally Posted by
MohammedKhallaf
In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.
There is *no* error in that
Re: Fanuc 180i won't boot
please post a photo of the leds
Re: Fanuc 180i won't boot
Quote:
Originally Posted by
MohammedKhallaf
In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.
Would you please take a photograph of the control? Also, please take a photograph of the back of the display.
Regards
AlexFanuc
Re: Fanuc 180i won't boot
Quote:
Originally Posted by
MohammedKhallaf
In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.
[1000] initialization completed, normal operation state.
Sent from my iPhone using Tapatalk
Re: Fanuc 180i won't boot
This looks like possibly an issue with the Windows boot loader?
I'm not sure on the steps, but maybe try to repair the installation with a Windows startup disc.