July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Hi all, I just purchased my first Hurco machine that is from 1986. It came with its original manual which I have scanned and created a searchable PDF for documentation. Is it alright that it is posted here to share with the community?
I will wait to here from a moderator before posting the PDF file.
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
I can;t believe you have not got an answer yet with your kind offer.
I know it is 32 years old and no longer available but don't know if it is copyrighted ?
Maybe that's why no one sticks their neck out.. What a shame . It took me a bit to get a manual for my 89 machine when I got it at 11 years of age
Rich
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Hi! I bought my first HURCO Machine with Ultimax 2 three months ago, and I can't find a manual anywhere. You are amazing!! I will wait here with you. :)
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
any answer from the moderator ??
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
I guess that’s a no go on posting a manual and gannsman hasn’t been in forum since April
I also need the manual
Please advise
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
I would think there would be a means of sending him an email ?
Maybe he gets a copy of your post ?
Rich
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
I went to his homepage under his profile and got his email listed there.
he is very helpful :-)
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
I have the Hurco "NC Programming Instruction Manual" 704-0001-555 March of 1990 as a pdf
This covers the NC Executive built in to Ultimax II, Max32, and Ultimax III - It should also be relative to B and BX except the screen shots are probably wrong.
I have a KM3 and KM3P and have all the original hardcopy manuals as well.
Hurco has basically abandoned anyone who has a "Blue" Hurco.
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Quote:
Originally Posted by
skullworks
I have the Hurco "NC Programming Instruction Manual" 704-0001-555 March of 1990 as a pdf
This covers the NC Executive built in to Ultimax II, Max32, and Ultimax III - It should also be relative to B and BX except the screen shots are probably wrong.
I have a KM3 and KM3P and have all the original hardcopy manuals as well.
Hurco has basically abandoned anyone who has a "Blue" Hurco.
Dear Sir ,
Can you give me scanned copy of the manuals for km3p with ultimax twin screen control as you say you have hard copy or photos of each page on my whatsapp no 919765946860.or on my mail spectrum.valves at yahoo dot com I will be very thankful to you if you please give me the same and oblige as this will help me in understanding my machine operations without doing R &D. my name is Shailesh Sheorey and I am from India.
regards,
Shailesh Sheorey
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Spectrumsas, if you follow Keenyjr's lead, it works
Click on TheGannsmann logo at the top of his post and it will lead to his website where you can contact him.
Skullworks old friend, I believe your comment about "blue" support is dead on
Rich
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Hi,
Did you get permission from moderator to post pdf manual . can you send me on spectrum.valves at yahoo dot com.
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Hi. Just got a Hurco KM3P with no manual. A copy of the file would be greatly appreciated...life_mail at yahoo dot com..
Thanks
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
Does anyone have a current (2019) source for KM3 or KM3P manuals?
Re: July 1985 Hurco KM3P Maintenance and Operation Manual Ultimax 2
I have the original manuals for a Hurco KM3P.
I would sell them, if interested.
My machine had the BX control.
It went to.0001 accuracy.
Also, other leftovers from my retrofit.
Drives, switches, etc.