DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
Hello Guys,
I'm just bought DMU 50V 5 axis MillPlus V310. Unfortunately, IDE HDD is faulty and the machine can not boot up the system.
I'm looking any one can help for HDD Ghost for this machine. Sure, I can pay for image file.
Best Regards,
INUC
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
Hi,
Do you have the Heidenhain ID Nr for the disk? That might be helpful for people to check. There are a few sellers on ebay offering this btw- you might be keen on checking there
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
I'm not sure it is right whether or not . I asked DMGMORI, they told me that this controller is not Heidenhain (But Heidenhain had took over them). It is Philips or Grundig / Model : PG1220 Series, they also not much information about this controller. There is yellow sticker put on the Toshiba IDE HDD " AE374040-567 " only. DMGMORI can supply this HDD+OS but they quoted terrible price for USD 3,400.
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
Hi, the OS is only available from DMGMori, there are a number versions, once you fit the disk, you then have to rebuild the parameters from a backup. I do these in the uk and it is not something I would recommend doing remotely. Sorry mate but see if you can negotiate a better price with Dmg bet the control working and then get a full backup.
Br
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
Hello. There is a DMU 50 V machine with a problem. After loading the control program, error 208 appears. The hard disk test showed that there are no problems. Maybe someone and you have a hard disk image for this machine. Thank you in advance.
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
are have finish it ,,, email me : [email protected] may be I can help you...
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
Hello
Does anyone have a BIOS photo of a 1996 DMU 50V working machine, Philips PG1220 Series, Grundig Millplus control, 5 axes. Interested settings:
1. Submenu "Memory Shadow"
2. BIOS Embedded Extension Configuration BIOS Extension Base Address
3. EXM menu
My e-mail: [email protected]
Thank you very much.
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
Looking for hard drive copy for V320. I sold the machine to a customer and the hard drive cave out a week later. We haven't finalized the deal yet so I need to fix the machine still to get payment. since I promised to get it up and running and train the staff.
Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants
I managed to solve the E252 error.
I turned the machine on and press delete.
Then heidenhain numeric service menu appeared.
From there i selected 6. Load default machine constants and clear all memories.
After I needed to import all machine parameters.