Fanuc Spindle Drive A06B-6064
HI all I have finished my Centroid Allin1DC conversion of my mill What difference
Now time to look at the Lathe witch at the moment is no better than scrap metal
It is Fanuc controlled I plan to use a Centroid Oak board
The spindle control side of this machine worked perfectly well be shame not to keep it
But being a A06B-6064 drive Centroid don't have any information to support it
The fiber optic side is not used and it has no spindle orientation
Do any of have any information on getting this drive working with Oak {ie spindle forward spindle reverse 0-10v speed }
Regards
Peter Wood
Re: Fanuc Spindle Drive A06B-6064
Quote:
Originally Posted by
peter789
HI all I have finished my Centroid Allin1DC conversion of my mill What difference
Now time to look at the Lathe witch at the moment is no better than scrap metal
It is Fanuc controlled I plan to use a Centroid Oak board
The spindle control side of this machine worked perfectly well be shame not to keep it
But being a A06B-6064 drive Centroid don't have any information to support it
The fiber optic side is not used and it has no spindle orientation
Do any of have any information on getting this drive working with Oak {ie spindle forward spindle reverse 0-10v speed }
Regards
Peter Wood
Normally we will suggest to change all includes the CNC controller, XYZ axes drivers and motors, also the spindle motor and spindle driver, to get the best performance and best compatibility.
