Surfcam heidenhain 530 postprocessor?

Hi, does anyone have a postprocessor for surfcam heidenhain 530? Thank you

Hi do you still need that PP?

Hello,
I already got both tnc530 and tnc426. But thanks !!

Hello
Can anyone please help with this. Modifying postform m Converting this G codes

G83 X10. Y10. Z-10 R1. Q.8 F100.
Y-10.
X-10.
Y10.

to this code (heidenhain iso format)

G83 X10. Y10 P01 1. P02 -10 P03 .8 P05 100.
Y-10. G79
X-10. G79
Y10. G79

Note: G79 is the call cycle for heidenhain control, it needs to be written in every location of drilling cycle so that the heidenhain will do the peck drilling otherwise if the control doesnt read the G79 it will only travel to does location w/o peck drilling.

Thanks in advance

Keep safe.

Hello
Can anyone please help with this. Modifying postform m Converting this G codes

G83 X10. Y10. Z-10 R1. Q.8 F100.
Y-10.
X-10.
Y10.

to this code (heidenhain iso format)

G83 X10. Y10 P01 1. P02 -10 P03 .8 P05 100.
Y-10. G79
X-10. G79
Y10. G79

Note: G79 is the call cycle for heidenhain control, it needs to be written in every location of drilling cycle so that the heidenhain will do the peck drilling otherwise if the control doesnt read the G79 it will only travel to does location w/o peck drilling.

Thanks in advance

Keep safe.