-
ball screw
I have had my cnc for years. it is 26 by 32 inches
do the 2010 ballscrews seem about right?
if so 2005 or 2010
i want to build a larger format
1500mm by 1500 mm
I was thinking about 2010 for the 1500mm
the basic square framework and gantry will be 80/20 3060
with 1545 cross members
it should be pretty rigid.
use for cutting uhmw, other plastics, wood, some aluminum.
servos
are
(3 Max)
-
Re: ball screw
really
NO one knows if a 2005 or 2010 ball screw will whip at 60inchs on a rigid machnine 2500 max rpm?
-
Re: ball screw
For a router, you want at least 10mm pitch screws.
If you really need 25m/min speeds, then get 2525 ballscrews, and gear the motor 2:1. I would not try spinning 2010 screws at 2500rpm.
-
Re: ball screw
I'm only looking for 300 to 350 Rapids. Most my cutting is inches
Sent from my SM-G955U using Tapatalk