Re: New MODBUSEZ SetUp Plugin For UCCNC
Your Frequency address in Serial Monitor shows set to 0001 and your manual reads 2001 for frequency address. You also must remember each time settings are changed in ModbusEZ configure UCCNC needs to be restarted before new settings arte able to be read.
Dan
Re: New MODBUSEZ SetUp Plugin For UCCNC
I'm not sure why but it was always set to 2001..the .pro and screenshot show it. I restarted UCCNC multiple times with that settings.
1 Attachment(s)
Re: New MODBUSEZ SetUp Plugin For UCCNC
Hello from Russia!
There is a frequency converter 9100-1t-00550gb. I do not understand how to connect it to the plugin. Help please.
1 Attachment(s)
Re: New MODBUSEZ SetUp Plugin For UCCNC
Re: New MODBUSEZ SetUp Plugin For UCCNC
Hello Dan,
Thank you for the work you've put into this plugin.
I've been having a difficult time finding the register values for my Simphoenix E500 VFD. I'd really appreciate if I could get some help here.
Manual: https://www.probotix.com/wiki/images...SunfarE500.pdf
Blog post someone made for using the E500 with Mach3 and their own solution: Mach3 E500 VFD modbus support instructions – Bill Caldwell's Blog
My VFD parameters have been changed accordingly for MODBUS/external communication.
Thanks for all the help that I can get, in return to the community I'll be publishing my UCCNC macros that I wrote for a 6040 router that I've built with an ATC spindle (JGL-80/1.5R24) and linear tool holder.
Re: New MODBUSEZ SetUp Plugin For UCCNC
Update, didn't notice but the newest version of the plugin came with a PDF with settings for the E300 which worked just fine for my Simphoenix E550 VFD. VFD parameter 4.00 had to be set to 0104 and 4.01 had to be set to 1 (local address, it should have defaulted to 1 but mine was 0 from the spindle factory for some reason). Thank you for documenting my VFD model and getting things working, it's a great feeling to have MODBUS set up and running.
Re: New MODBUSEZ SetUp Plugin For UCCNC
I am using screenset 2017.Install the MODBUSEZ plugin and I have a VDF Fuling DZB280 and everything works correctly, the only problem is that the speed I send (Sxxxx), the program is sent by the VDF but multiplied by 4. For this reason for example to set the speed to 10000 RPM I have to type in the MDI S2500.
3 Attachment(s)
Re: New MODBUSEZ SetUp Plugin For UCCNC
Hello Dan,
I have a small problem with the control of my spindle using a Hitachi WJ200-07MF Ver. 2.0 VFD.
The problem is: The Single Coil setting works great - I can turn on and off the Spindle and change the RPM.
The Multiple Coil setting does not work. The Spindle never turns on.
Can you help me get the Multiple Coil version working please?
Here is my setup:
VFD: Hitachi WJ200-07MF
Description: 750W VFD - 110V powered
Spindle: UgraCNC 800W Air Cooled Spindle - GMT Air Cooled CNC Spindle 0.8 kW 220V 24000 RPM R | Air Cooled Spindles
Note: The Datasheet says it is a 2 Pole motor (I am pretty sure) so I have set the motor type in the VFD to 2 pole (and then used auto-tuning).
ModBus Adapter: RS485 to Ethernet converter by Waveshare
Wiki: https://www.waveshare.com/wiki/RS485_TO_ETH
Note: I put an O-scope on the RS485 pins at the inverter. Signals looks good enough to me.
I also used another computer and a USB-RS485 as a Modbus slave to confirm that what I am sending using the ethernet adapter is the same as what a RS485/Modbus slave was reading. The messages transmitted matched the messages received. Also, the Single Coil settings seem to work quite well. So, I don't suspect the ethernet adapter (for now anyway).
UCCNC version = 1.2111
MODBUSEZ version = 1.6 (Note: Configuration still says V15 for whatever reason). I did try v15 and v155 and the behavior didn't change.
Here is a screenshot of the settings I am using for Multiple Coils (that doesn't work):
Attachment 442022
Here is a screenshot from the Serial Monitor program when using those settings:
Attachment 442018
I also attached a text file of the serial monitor output when using those settings.
Do you see anything amiss?
Note: I did try a recommendation you gave someone else - setting register b031 to '10'. It did not change the behavior.
Any help would be greatly appreciated.
Thanks,
Karl
3 Attachment(s)
Re: New MODBUSEZ SetUp Plugin For UCCNC
Hello again Dan,
Here are the settings and the serial logs of the Single Coil (only clockwise rotation) that do work just fine for me.
MODBUSEZ Configuration Settings:
Attachment 442024
Serial Monitor Picture while using those settings (I moved the spindle speed up and down while taking the capture):
Attachment 442026
Also attached - Serial Monitor Text File snippet of that capture.
I thought maybe seeing the working version would highlight something in the non-working version.
Anyway, thank you (or anyone else :) for any and all help,
Karl
Re: New MODBUSEZ SetUp Plugin For UCCNC
I am using screenset 2017.Install the MODBUSEZ16 plugin and I have a VDF Fuling DZB280 and everything works correctly, the only problem is that the speed I send (Sxxxx), the program is sent by the VDF but multiplied by 4. For this reason for example to set the speed to 10000 RPM I have to type in the MDI S2500.
Re: New MODBUSEZ SetUp Plugin For UCCNC
Could someone explain to me where to find or how to download the latest plugin. I switched from a HY to GT Huanyang VFD and need to switch plugins to the MODBUZEZ plugin, I believe. Thanks
Re: New MODBUSEZ SetUp Plugin For UCCNC
I have been researching on all forums and have not been able to get modbusez v16 to work with my 220v 2.2k huanyang GT series.
Windows 10 64bit. I've tried everything on the forums.
Has anyone had any luck?
Re: New MODBUSEZ SetUp Plugin For UCCNC
Has anyone go this working with a YL620-A?
Baud Rate to 19200 as per the current VFD setting / one stop bit, and changed the VFD address to 1
On the modbus Setup i have the following
On/Off address coil 0016
Frequency Address coil 0000
Spindle on CW 0000
Spindle on CCW 0001
Spindle Off 0003
Check box for multiple coils - Not sure what this should be but I tried other combinations
The link to the manual is here, a bit chinglish
https://bulkman3d.com/wp-content/upl...ter-Manual.pdf
1 Attachment(s)
Re: New MODBUSEZ SetUp Plugin For UCCNC
For anyone with a YL620-A here are the settings that I have got this VFD to work with, I have not tested how accurate the RPM is yet but the spindle responds to increase /decrease / stop and direction and is reporting Freq I think.
Changes to the Parameters on the VFD are as follows
p00.00 - 3. - Modus Control
p03.00 - 3 -9600Bps
P03.01 - 1 - Address
Baud Rate - 9600
Stop Bits - One
on/off address 2000
Freq address 2001
Spindle On CW 0092
Spindle on CCW 00A2
Spindle off 0081
Check box for multiple registers - Yes
Amp Display Register - 200b - Working just I need to check what it is reporting, i believe its freq at the moment but will confirm
Quote:
Originally Posted by
awilde
Has anyone go this working with a YL620-A?
Baud Rate to 19200 as per the current VFD setting / one stop bit, and changed the VFD address to 1
On the modbus Setup i have the following
On/Off address coil 0016. -- Not correct see above
Frequency Address coil 0000-- Not correct see above
Spindle on CW 0000-- Not correct see above
Spindle on CCW 0001-- Not correct see above
Spindle Off 0003-- Not correct see above
Check box for multiple coils - Not sure what this should be but I tried other combinations
The link to the manual is here, a bit chinglish
https://bulkman3d.com/wp-content/upl...ter-Manual.pdf
Re: New MODBUSEZ SetUp Plugin For UCCNC
Corrected the Amp Display this should be 200C
Re: New MODBUSEZ SetUp Plugin For UCCNC
I am in the same boat. I cannot for the life of me find where to actually download this plugin.
Re: New MODBUSEZ SetUp Plugin For UCCNC
Quote:
Originally Posted by
Belarusian
Update, didn't notice but the newest version of the plugin came with a PDF with settings for the E300 which worked just fine for my Simphoenix E550 VFD. VFD parameter 4.00 had to be set to 0104 and 4.01 had to be set to 1 (local address, it should have defaulted to 1 but mine was 0 from the spindle factory for some reason). Thank you for documenting my VFD model and getting things working, it's a great feeling to have MODBUS set up and running.
Hi Belarusian, I also have a Simphoenix E550 VFD, maybe you can help me, do ypu know where can i get the newest plugin ? or a version that will work with uccnc v.1.2111
Thanks in advanced..
BR Palle Jensen
Re: New MODBUSEZ SetUp Plugin For UCCNC
Re: New MODBUSEZ SetUp Plugin For UCCNC
Quote:
Originally Posted by
ger21
Perfect, Thanks a lot Gerry