Mazak Slant Turn 35n mazatrol t32-3
Hello friends,
Can somebody help me out, when I try to orient the c axis it doesnt complete the operation and the alarm 39 over amp displays on the screen, the shaft that is connected to an hydraulic valve, the clamp that stops the c axis, when I try to orient the c axis it doesnt unclamp. Need help please.
Re: Mazak Slant Turn 35n mazatrol t32-3
Dear Friend,
You are not specific in hi-lighting the problem.
1. When you press the C- AXIS I/O push button you can see the C-AXIS gear engage/dis engage operation.
Is it happening?
2.You can check the spindle orientation in MDI mode by typing the command M19 .
Is it ok?
3.The C-AXIS clamp function is a synchronization of spindle orientation and C-AXIS orientation.
If there is any shift in the orientation the gears won't mesh.
I think your spindle drive is FR-SF.
Finally have you re-initialised the system and if so please ensure that all the parameters are input properly.
SHEKAR
Re: Mazak Slant Turn 35n mazatrol t32-3
Kindly gave me a mill spindle orientation adjust parameter in mazatrol T32