Doosan S310 home position problem

We have a Doosan S310 with a Fanuc Oi-Mate T control which has recently started to default to a Z axis value of +500mm when you send it home this is a problem as it only has 380mm of Z Axis movement.

Does any one know the parameter number for the Z Axis home position.

Quote:

---

Originally Posted by brit61

We have a Doosan S310 with a Fanuc Oi-Mate T control which has recently started to default to a Z axis value of +500mm when you send it home this is a problem as it only has 380mm of Z Axis movement.

Does any one know the parameter number for the Z Axis home position.

---

Incremental position coder type
1850 grid shift tunes the location from dog to a potential 4096+ or 4096- and 1240 is what that selected position is going to be called.

Absolute position coder could do that with a larger grid and the right procedure, or a procedure change could toggle 1815.4 at the desired HOME position, and again, use 1240 to name it.

Hi Darryl,

Thanks for the help I was not fully understanding the work shift function as it is a new machine to me but it is sorted now!

Best regards

Alan