Hey Ya'll,
This is my first post as a member of CNCZone.
I am a beginner when it comes to CNC Plasma.
I have never known anyone with a CNC Plasma.
I have never used or seen a CNC Plasma being used (besides YouTube).
I recently began doing research on CNC Plasma Tables and considered building a basic DIY table. While I was researching, and seeing what it would take to build or buy a used setup, I came across a screaming deal on a 5'x'10' Dynatorch XLS table and Victor Cutmaster A60 (cheaper than I could have built my own). I snapped it up as quick as I could and assembled as much as I could; it needs two fiberoptic comm cables. So now, I have this kick ass machine sitting in my shop and I haven't the faintest of ideas on how to use it properly.
I am very excited to get this up and running but I really don't know where to start. What is the best way to start designing? Can I convert a vector image (Adobe Illustrator) into a cut-able image?
I have time for my cables to come in so I plan on doing lots of research.
- Kolt
https://lh6.googleusercontent.com/n9...w2160-h1209-rw
https://lh4.googleusercontent.com/OG...w2160-h1209-rw
https://lh4.googleusercontent.com/ys...w2160-h1209-rw
https://lh6.googleusercontent.com/5y...w2160-h1209-rw
https://lh5.googleusercontent.com/II...w2160-h1209-rw
https://lh4.googleusercontent.com/gO...w2160-h1209-rw