Old Emco against new China turning machine

Hello,

first sorry for my english ;) I demonstrate the differences between a very old (I think 1965) Emco Maximat Standard and a early Bernardo WQV550 China turning machine.
The Bernardo is my first DIY CNC machine and the Emco was a very good purchase. The Emco has perfect requirements for linear guides!!!


https://youtu.be/E7Bh_UrgacQ


After cleaning the Emco i switch the old ball bearing and paint the machine. Next step is ball screw on X and Z...

The Video is in unfortunately in german but i think the pictures from the drive spindle and the machine parts are also interesting...

And here is part 2 of the Video.

https://youtu.be/qTHRVyBaKto