K40 laser & Corellaser issue

Hi guys,

I've got a problem with my K40 & corellaser settings.

So coming back to the issue.. K40 has a working space close to 30x20cm, however whenever I am trying to engrave or cut a lower part of the paper, it won't go lower than 15cm.
Machine is working well, always when I turn on going to "home position".
The object in corel is minimized, so I have no idea what am I doing wrong..

Even though when I am changing a size of working space in corel for ie. 30x40cm it seems like it still cannot go lower.

and.. truly sorry for my bad English, hope it it all understandable for you guys.
if you need any screenshots of pics of the machine while its working, please let me know.

many thanks

BR
M4ayhem

Hey,

Have you changed the workspace to 30 x 20cm in the machine properties which should the far left icon in the cutting/engraving toolbar that sits in the top right hand corner of the corellaser screen? 'Page size X' & Page size Y'. That way the machine recognises the machine bed size as opposed to changing the page size for the design in Coreldraw....

Hope that helps!

Lorraine