Information about 2400 upgrade
I am working on upgrading a Dyna 2400 with a Gecko G540 board and have run into problem due to my lack of experience and am wondering how you wired the db9 plugs from the original motors. And it appears that you removed the following part and I wondered why that was.
http://www.cnczone.com/forums/attach...9&d=1308942958
Quote:
Originally Posted by
Fastest1
Then I installed a Gecko G540 on top of the original heat sink. This is during testing trying to gain spindle control. I am able to operate the spindle manually and believe with further testing I should be able to control it thru Mach.