Re: HASS vs. Tormach 1100MX
Aside from the larger footprint and additional capabilities of the Haas it would be happier doing its intended purposes which is to crank out parts all day everyday. That would not be my use case and would likely see failures happens from stagnation. The Tormach would be the perfect home gamer machine if they just went the one step further and put linear rails on it. That's the only real complaint I have about my home brew Chinese conversion is the occasional table stall on the X axis. It does everything else I need it to do as well as I need it to do it. A Haas for a hobbyist is just hard to justify.
Re: HASS vs. Tormach 1100MX
Here's the way I see it:
If you're a hobbyist, any of these machines will probably do all or more than you'll ever need it to do. If you have the money and want to buy a Haas, knock yourself out, it's cheaper than a gambling problem and better for you than doing drugs. I'd choose Tormach over all the others because they have a proven track record of supporting the product, and they're the least likely to retire/drop dead/or go under in a recession. Syil is becoming more interesting but I'd still consider Tormach safer.
If you're a business looking to prototype parts, a Tormach might be a very good choice. Prototyping/first-article parts are relatively expensive to contract out, and as a startup your first two goals are to figure out exactly what product the market wants, and how to sell it to them effectively. A Haas or Okuma won't help you do those any better than an 1100, but the 30-50k in cash saved might buy you the time or marketing spend to get over that critical hump. From what I've seen, businesses typically run out of cash before they run out of product.
Given how competitive the contract manufacturing business is, I am generally of the belief that businesses should invest their time in developing a few good suppliers and spend their money on things to grow the business. I think many guys look at the outsourced unit price and don't pay as much attention to cost of capital or their labor to replace that. I suspect that some of the YouTubers everybody watches are turning large amounts of money into small amounts of money very slowly, perhaps slowly enough that even they don't realize that's what they're doing. The ones who are highly-leveraged from all the cheap credit available the past 5-8 years will be in for a shock when the next recession comes and the market's appetite for fancy audio/camera/knives/gun gear (aka "man jewelry") takes a pause. If you bought everything with family money (or similar) you can just dim the lights and drive Uber for a while, but if you can't keep up the loan payments then the end will come at a time not of your choosing.
Re: HASS vs. Tormach 1100MX
If you care about through-put, and accuracy, there is no question a Haas will run circles around ANY hobby machine. They will get most parts done anywhere from 2-5X faster, and with far greater accuracy. I think the cost estimates given here are over-inflated, as I know people (several on this forum, who will, I expect, speak up at some point) who have made EXACTLY the same decision, chose the Haas MiniMill, and were VERY happy they did. Cost was no more than maybe 30% higher than a COMPARABLY EQUIPPED Tormach. If it's for business use, and will be used a lot, the additional cost is easily justified. The incremental cost, if financed, is no more than a few hundred $ per month. You'll get a machine that is FAR faster, FAR more accurate, more reliable, and with a higher resale value. And, you'll get a real, high-performance ATC, FAR better 40-taper spindle, a true name-brand industrial controller with enormous expansion capability.
Regards,
Ray L.
Re: HASS vs. Tormach 1100MX
Ray, I agree that when you add in the ATC, enclosure, etc. that the 1100 gets relatively expensive. The base machine can make anything the loaded one, can, you just spend more time standing next to it. I think you can still get a Tormach to your door for ~15k. That's where I see the best value prop.
The key part in your post is "[if it] will be used a lot." I suspect a lot of would-be startup guys overestimate the time they will spend machining parts and underestimate everything else. A Haas or anything else like it will certainly make you a lot more money if you have a clear and airtight plan to move product. Many (most?) of the folks I see asking these questions are not yet at that stage.
Re: HASS vs. Tormach 1100MX
Being the former owner of a haas and the current owner of a PCNC 1100, if price was no object, I would definitely go with the Haas.
When I had my shop I had a FADAL 3016 a Haas TM-1 with a 10 pocket ATC, rigid tapping and a 5C 4th axis and a heart attack.
When I closed my shop I sold my FADAL and since my Haas wasn’t paid for I sent it back.
Knowing what I know now about the Tormach and the Haas, I would have taken some of the money I got for my FADAL, paid off my Haas and brought it home.
Don’t get me wrong, I have no complaints about my Tormach, but the Haas was a way better machine for the kind of work I do.
Only problem with the Haas was it only had a 4000 RPM spindle.
It had a CAT 40 spindle taper so a 1 inch end mill was no problem. It also had 7.5 horsepower as opposed to 1.5 on my Tormach.
Re: HASS vs. Tormach 1100MX
I think there's no comparison between a hobby mill vs. A real VMC. Too manny differences in the construction of the machine.
Re: HASS vs. Tormach 1100MX
If I had a chance to do it again I wouldn't of bought a Tormach and went straight to a real VMC right away.
Re: HASS vs. Tormach 1100MX
Quote:
Originally Posted by
sin_arms
If I had a chance to do it again I wouldn't of bought a Tormach and went straight to a real VMC right away.
+1000
Re: HASS vs. Tormach 1100MX
Haas does not charge for setup .. Every state has a Haas dealer that supports it . Trying to compare Haas to Tormach is like trying to compare mastercam to Microsoft paint ... I am not saying the Tormach is a bad machine but from everything I have seen of them there NOT a industrial machine.. If your trying to make a point that Tormach is cheaper you need to understand your getting less machine for less money is all ... About half my shop is Haas machines and you need to look at is more as "What do I need to make my parts" Haas does a great job at making my parts and making me a living ,,, Haas is not the best machine made but its more than good enough for my use... you need to look at what your use and needs are from a machine and make a choice of machine based on that ...
Re: HASS vs. Tormach 1100MX
Not sure how you can compare them. The price is no where close, we had a quote last year for a Minimill and TM1, both were over 40,000 without a bunch of add-ons just ready to machine. Saying that they are close in price is just silly inexperienced guesses. There is so much more into what you buy when you are just starting up. No way I would have spent money on a Haas when I just started up producing parts, I had no way of knowing how much if any money I would be making. If you can afford a Minimill then why not just step up to a VF2 so you have a real VMC, its not that much more money.
Re: HASS vs. Tormach 1100MX
Unless I missed it, you never told us what your intentions are for the machine.
Re: HASS vs. Tormach 1100MX
1982 Datsun Versus 2018 Dodge Ram.
Re: HASS vs. Tormach 1100MX
Quote:
Originally Posted by
ScottDW
Unless I missed it, you never told us what your intentions are for the machine.
Yeah, and thus, "this makes no sense"... I liked my 1100, but its no HAAS, OTOH, its just a hobby toy for me, so hard to justify the Haas. If I was running a business, I'd go HAAS tho.
Re: HASS vs. Tormach 1100MX
I had to select ''Made no Sense'' because they are completely different machines.
We had to make a similar choice a few months back. We have a BP clone CNC mill that has served us well for a number of years. That and a manual lathe allowed us to protype and build some of our new product line, but it became clear that to do any real production we were going to have to do something different. So the search was on.
The real dilemma here was the question as to whether we had a viable product or not. At this point we didn't know, but if the orders started rolling in we would not have the production capacity to fill them. But if the product flopped, then we would have a rather large paper weight sitting in the shop. The good news is that we did not have to borrow money to buy equipment, had that been the case, then it would have dramatically affected the decision. Even a year later, we are still trying to figure out if we are going to have a real business or run a hobby shop business. We have orders, but not at the volume that would really make it a viable business. We're working on that.
We did look at the Tormach 1100 and rejected it in the first round as being just a really nice hobby machine, but really not up to our production needs, the spindle speed was limited, and at $23,000 we couldn't see the value for us. The only other real option was Haas or other older used equipment of which there is plenty available. So after looking around we decided that a Haas made the most sense for us, so now it was a matter of which one. The other consideration was spindle HP in that we are a home shop with somewhat limited available single phase power.
Unlike many startups cost was not the major consideration, but rather what was going to meet our needs. We were prepared to buy new if need be. After a couple of weeks looking at Ebay and Craigslist ads and chatting with Haas sales we found a couple of Ebay machines that looked promising. A TM1P in Las Vegas, and a TM2P in Florida. So a couple of airplane rides later we finally settled on the TM2P in Florida because it turned out to be the unicorn machine. One year old, 122 spindle hours, and was equipped with every option that Haas offered for that machine, including a 20 tool changer, and in addition came well equipped with tooling.
It was delivered to our door for about $43,000. We have the equipment on this end to do our own rigging so only cost a couple hundred for a heavy swivel hook so we could rotate it while lifting from the top. We didn't see the need to bring in a Haas tech to set it up, it was delivered on a Friday afternoon and we made first chips with it on Monday morning.
Compared to the quotes we were getting from outside vendors, the machine has paid for itself in the last 9 months. And those quotes would have put us well above of the price point we were trying to hit for our product. Labor cost in this case is zero because we work pretty cheap when working for ourselves. What was taking 4 to 5 hours on the knee mill because of limited spindle speed, the Haas would do in an hour with the 6000 RPM spindle, almost enough HP, and reasonably fast rapids.
Re: HASS vs. Tormach 1100MX
Quote:
Originally Posted by
Steve Seebold
The 6,000 RPM spindle is only 900 more than the Tormach, but the extra 6 horsepower will make a huge difference and 200 IPM rapids won’t hurt anything either.
Actually 400 IPM rapids, and yes, the extra HP really makes a difference. When we're roughing out a part the spindle load is 75-85% in most cases. Allows you to really move some material. We do a lot of cutting in aluminum at 180 to 220 IPM
Re: HASS vs. Tormach 1100MX
Not a Tormach or a HAAS, but.a similar comparison.
I just made the jump last week from my Novakon Torus servo to a brother S500X1. It really boils down to the types of parts your making and how much you value your time. I've been producing parts for the last 5 years on the Novakon, and it served it's purpose. But It takes so long on larger parts, I was leaving lots of money on the table "so to speak". I can certainly say there is no remote comparison to the two type of machines. The control is so much more streamlined to use. It has safeguards built in to prevent various mistakes, and all functions are instantaneous (good at 2000IPM rapids.). I can stop mid program just by opening the door, take a peek and hit cycle start. Or start at some random point and it safely retracts,collects it's marbles, loads the respective tool and continues on. When I was removing lots of Metal,chip control,flood coolant capacity etc. was a struggle to keep up with. Now I don't have to manage anything other than dumping chips out of the bin. When the operation is complete, the machine is damn near spotless inside. I used to spend a lot of time scooping chips out of the enclosure, digging out of key ways,vise etc. Things are just sooo much easier. The machine is also smaller in footprint because it's designed so efficiently. Also not having to deal with way oil is really nice. It will run of a 30 amp breaker with a phase converter and uses very little air for a VMC. I was in a major bind to get some parts out when the VMC hit the floor on Tuesday. The tech installed on Tues. gave training on Wed., I spent a day learning the control on Thurs. and didn't really expect to make my Fri. ship deadline. I spent some time fumbling my way around the control and started machining 1:30 on Friday. By 4:30 I was headed to Fed-Ex with the parts boxed up. I was blown away at the speed of everything. There were four parts of similar, but different geometry from 10 x 8 x 1" plate. Being my first chips, I was running pretty conservative. The load meter never went over 2 bars and I was only rigid tapping at 1500 RPM (instead of 6000), and my cycle time on the part went from an hour to 17 minutes. The chip bin in the video was from the four parts that were punched out in short order. I still have a lot to learn on the control, post processing different modes (High accuracy 3d surfacing etc). But I'm seriously blown away at the productivity/ease of use.
https://www.youtube.com/watch?v=wP6ApFSIP9c