Problems with LBL programming

Hello

I’ve got a problem with my old Maoh Hansen sinking EDM machine in case of LBL programming.
An example

TOOL CALL 1
CYCL DEF
LBL 1
ngfoji
LBL 0
TOOL CALL 2
CALL LBL 1 Rep 1

The machine takes tool 1 erodes everything ok
The machine takes tool2 erodes everything ok
Then it wants to use the tool 2 again

It ignores LBL 0 somehow.
Does anyone have a clue?

Thanks in advance
Greetings

Don’t you happen to have the LBL call in LBL?
Show your program. It’ll be easier to help then ;)
Greetings

Quote:

---

Don’t you happen to have the LBL call in LBL?
Show your program. It’ll be easier to help then ;)
Greetings

---

No, everything is properly, as it should be.

Show your program.
It would be easier to understand.

Or is your program strictly confidential? ;)

Hello Hans-Michael

Write your LBL after M30 at the end of the program and call it by T1 and T2 with LBL CALL.

I have already tried that.
The machine doesn’t know M02 or M30.

I programmed LBL after M30 when all LBL had been completed.
The machine processed the LBL with the last EL.

IT WORKS! :)

I wrote LBL after STOP
And now it works

Thanks

Hello
I would leave Rep 1 out and only write CALL LBL 1

Regards, Armin Rauleder