Awesome Jan glad you'll be helping the guys out.
Jack
Printable View
Awesome Jan glad you'll be helping the guys out.
Jack
Hi guys I have some good news for you. The G95 code does work in the Skyfire VMC2 with the EC200 VFD controller. I've tried it at 200, 300, and 400 RPMs while tapping a 1/4"-20 thread and using a Feed rate of .050" F.050 It cut perfectly at all RPMs without changing the Feedrate. Just make sure if you use the G95 before the M29 line of code that you do a G94 after the G80 so it goes back to ipm (inches per minute) mode. G95 is inches per rev (ipr). It will ruin your day if you don't cancel it after tapping. Here's a sample.
%
O1040 (TAP TEST 2-25-18)
(T2 D=0.204 CR=0. TAPER=118DEG - ZMIN=-0.5113 - DRILL)
(T5 D=0.25 CR=0. - ZMIN=-0.6 - RIGHT HAND TAP)
N10 G90 G94 G17 G49 G40 G80
N15 G20
N20 G28 G91 Z0.
N25 G90
(DRILL1)
N30 T2 M06
N40 S5620 M03
N45 G54
N50 M08
N60 G00 X0.4033 Y-0.4848
N65 G43 Z0.4 H02
N75 G98 G81 X0.4033 Y-0.4848 Z-0.5113 R0.2 F20.
N80 G80
N85 G00 Z0.2
N95 M05
N100 G28 G91 Z0.
N105 G90
N110 G49
(DRILL2)
N115 M09
N120 M01
N125 T5 M06
N140 G54
N145 M08
N155 G00 X0.4033 Y-0.4848
N160 G43 Z0.2 H05
N165 G95
N170 M29 S300 M03
N175 G84 X0.4033 Y-0.4848 Z-0.6 R0.2 P0 F.050
N180 G80
N182 G94
N185 G00 Z0.4
N195 M09
N200 G28 G91 Z0.
N205 G49
N215 M30
%
It seems nice and tight but I do not have anything to compare it to. I'm happy.
Seems like most of the machines hitting the US aren't working properly. At this point I wouldn't want my cash floating around China for a year to get something that doesn't work new from the factory
I have to agree with you old sport.....seeing as I'm the owner of amongst the first SKYFIRE machines to be sent, I can truthfully state...........Ya gotta be in it to win it.......if you want to get a machine I advise you to join the queue now....you won't get one any other way.
Ian.