C-tek km-150 232 connection
Hi!
I'm new to this forum
I have 2 C-tek (taiwan) KM-150 with cnt380.8 software in the controller.
I can't figure how to transfer nc prog. with the rs-232 port.
Is there a c-Tek user here with a 232 setup who can share is setup?
I have the same controller software on my desktop PC and I'm able to transfer prog. from another pc connected via serial port with a null modem cable but when I use the same setup on my cnc it don't work!
All my config (baud rate ect) are ok!
Thank you
Re: C-tek km-150 232 connection
Hi everyone!
For other C-Tek users:
I Found The problem! on my c-tek. the cable from the controller pc to the outside of the machine is already a null modem cable! (I think). To make it work I pluggued a nullmodem cable directly fro the controller pc to my laptop. Thatr why I assume the cable from the controller PC to the outside of the machine is a nullmodem! I don't have a "straight" cable to test it right now!
Anyway have a nice day!