Problem with Hurco km3p startup

I have just purchased a used Hurco km3p CNC knee mill .I got struck on start page showing machine specifications like X axis travel
Y axis travel
Z axis travel

Spindle speed

And only one soft switch exit
Which when pressed doesn't goes to next page.

Press exit then 'enter' 999 'enter'

Quote:

---

Originally Posted by bloke

Press exit then 'enter' 999 'enter'

---

Thanks but machine does not jog in manual mode and if spindle is started it stops automatically after a minute, further machine does not do warm-up procedure. This machine is not in operation for a long time ,so does it be having memory board battery lost.In this case will machine loose it's parameters, if so where will I get those.Please guide.
Thanks,
Shailesh Sheorey

I have hurco km3p ultimax controller after a long time in store I tried to start the machine but 1 page got struck than I use enter 999 enter as told by you some time back . got on manual page but while resetting servos x asis motor started to oscillate and start button still flashing . Earlier while pressing start am air valve activating noise use to come which now does not rest all things like flood , mist , buttons wiork and appropriate relay operates. can you help in this . memory board originally does not have batteries on it but it has battery pockets there on board, .