Printable View
hi Guys
can some one please confirm, before I do anything daft
that the connections on the new supply are in a different order to the old one
ie the 5v on the old is terminal 6 and needs to be terminal 1 on the new one etc
https://www.cnczone.com/forums/attac...d=420004&stc=1
https://www.cnczone.com/forums/attac...d=420006&stc=1
it looks pretty obvious but just wanted to check
cheers
Dave
The old one is very standard. The new one lacks the IN signal. It must be combined with TH and TL. So they are not similar and not simply reversed in my opinion.
Sent from my iPhone using Tapatalk
It is better to double check with the supplier before anything wrong.Quote:
Originally Posted by Dtcrafts
Isn’t the “in” just to the right under the new supply sticker?
hi
guys
thanks for the replies
the IN signal is indeed covered by the green terminal connector
I think I was trying to just confirm that all we need to do is to change the connections around to suit the new configuration
well thats what I did and it works great
just a shame that these HV lines cant be repaired, thats all that was wrong with it