TNC 530 USER NAME

Hi!
We are having a problem with Heidenhain TNC 530 installed in a milling machine, sometimes, when we started the machine, at the screen appears the following message

USER NAME:

before starting operating system.
If we turn off the CNC and after turn on it, sometimes, the operating system starts, PLC compiles, etc; then we are able to work for a bit, but shortly after the following message appears:

Fatal error child process termínate
Process: soky
Exit code: 3
Detailed error Information has been stored to SYS:\soky.err
Press END to reboot


We are suspecting hard disk is damaged, but we are not sure. What you recommend us?
Appreciate very much your help


RVILA SPAIN

Quote:

---

Originally Posted by rvila

Hi!
We are having a problem with Heidenhain TNC 530 installed in a milling machine, sometimes, when we started the machine, at the screen appears the following message

USER NAME:

before starting operating system.
If we turn off the CNC and after turn on it, sometimes, the operating system starts, PLC compiles, etc; then we are able to work for a bit, but shortly after the following message appears:

Fatal error child process termínate
Process: soky
Exit code: 3
Detailed error Information has been stored to SYS:\soky.err
Press END to reboot


We are suspecting hard disk is damaged, but we are not sure. What you recommend us?
Appreciate very much your help


RVILA SPAIN

---

Hi I know it's been a long while but what did you have to do to resolve this pr Home? I now have it !!

Hi, will anyone of you could tell how to get out of this fatal error, child process termination on iTNC530 control

First of all, if you can, take a backup with a TNCremo.
Then the harddisk needs to be changed.

Jukka