About swarf toolpath

How could I creat swarf toolpath with camworks for machining cone in multiaxs strategy?
I could not figure out how to do it.
https://www.cnczone.com/forums/attac...d=395667&stc=1https://www.cnczone.com/forums/attac...d=395667&stc=1http://immage.biz/images/2018/06/23/Sbur.jpg

try flowline between curve startegy selecting the 2 diameters of your cone as curves

Quote:

---

Originally Posted by vincerace

try flowline between curve startegy selecting the 2 diameters of your cone as curves

---

Thanks it's working!