Printable View
Is there a setting to turn off the loud beep at each keypress? I was looking through the manual and the user settings but I didn't see anything about changing the volume of the beep.
Just got my VF-2 and SL-30 delivered yesterday! What an exciting day! I'll see if I can post some pictures of these two beasts and the fork lift that wielded them.. :) hehe
cheers
On the bottom of the control pendant, there should be a black knob. Turn it and it will adjust the volume of the key beeps.Quote:
Originally Posted by pmurdock
To clarify what Cory said, the beeper is located on the bottom of the pendant. The face of the beeper rotates to cover or uncover the speaker (adjusting the volume).
Mine is fully closed and I still find it obnoxiously loud. I'm eagerly awaiting somebody coming along and telling a painless way to reduce it even further (before I jab a dental pick through it :mad:). :D
Take the back of the pendant, take the beeper out of the bottom, wrap it in some foam and leave it laying on the bottom of the enclosure.
that's a pain.. :) It should be as simple as a setting with a value of 1 to 25 or something like that..
it does help covering the speaker though.. mine came fully open and it was ear piercing everytime I hit a key.
cheers!
Paul
You want a real pain or nasty trick for your second shift people? Turn the baffle so it is full volume and then go into the Settings and turn on Beep at M30. As soon as a program ends with an M30 the beeper starts.:D
That's not the only time it's annoying. The TL-1 does it at tool change. It's beeping like crazy but I like to clear chips before swapping the tool and resuming the cycle. BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP BEEP.(chair)Quote:
Originally Posted by Geof
just pop the back off the cover and disconnect the white plastic connector.
thats easiest on vf8s anyway
Duck tape.
I turned a bit of delrin rod as a pop-on cover for the beeper knob/opening, that brought the sound down to a manageable level. --ch
I just rolled up ear plugs really thin and lodged them in there and closed the volume adjuster. Peace, and Quite.Quote:
Originally Posted by pmurdock
Eleven year old thread!Quote:
Originally Posted by MCnC978
Take the back of the control off and pull the plug out from the beeper it's the easiest way
Setting 356 will turn it off also depending on the version different number can turn it down or upQuote:
Originally Posted by pmurdock