Initialization Disk Charmilles Robofil 290
Hi
I've a little problem.
I have a old machine (Robofil 290) and the initializatione disk in is unreadable... and nobody had made some backup (?!?!?)
Is there some boby that can help me?
The disk is labeled
ROBOFIL 290/3X0/5X0
Mark VI5E
COM: MNA5X
EXE: MN99
PIL: FP18
TIA
Orcabigia
Charmilles Robofil 290 Software
Hi there.
Just want to know if you came right with the software?
It could also be the diskdrive causing the problem.
I have the software backed-up and could mail it to you!
Best Regards
Sakkie
Re: Charmilles Robofil 290 Software
Quote:
Originally Posted by
sakman
Hi there.
Just want to know if you came right with the software?
It could also be the diskdrive causing the problem.
I have the software backed-up and could mail it to you!
Best Regards
Sakkie
hi there
could you please sent me the software?
my englis disc is not good anymore.
thanks in advance.
Re: Initialization Disk Charmilles Robofil 290
Howzit,
Trust you are well.
Could you please send me your software version.
Regards
Re: Initialization Disk Charmilles Robofil 290
Found it, it is VI.5E.
Please send me your mail then I can forward it to you.
Sincere Regards
Re: Initialization Disk Charmilles Robofil 290
Dear Sakman
please send me the software mark VI5E
thank you very much for your help
best regards
Alaa
Re: Initialization Disk Charmilles Robofil 290
Dear Sakman
please send me the software marker VI5E
thank you very much for your help
best regards
Re: Initialization Disk Charmilles Robofil 290
dear sir
i do have this problem too that my disks has corrupted and i do not have a backup could please send to me the software
Re: Initialization Disk Charmilles Robofil 290
Hi, I also have a Robofil 290 which starts up with "SOFT NOT LOADED". I have the floppy discs but they appear to be blank and the machine will not read anything from them.
If anyone has a copy, could they please send them to [email protected]
Thanks in advance!