Hi there
What I want to ask is about:
Replacing the MitsubisheMeldas 300 Spindle Servo Motor With a Delta C2000 One.
Is It Possible?
Regards Russell
Printable View
Hi there
What I want to ask is about:
Replacing the MitsubisheMeldas 300 Spindle Servo Motor With a Delta C2000 One.
Is It Possible?
Regards Russell
Do you have the link to get a copy?
Thanks
Dear Marco, Could you explain what is your mean?
Regards :-)
Is the L3 programming manual available anywhere?
hello
i have an traub tnm42, and i had same battery problem.
I am user on this tool, and my service experience is beginner.
i initialized mc-161 card, and i am bloked at the formatting procedure.
I followed the procedure until the step:
"Go to PROGRAM/ IN/OUT screen."
I cant find "program" "in/out" and "erase" soft key.
I attached a picture with what i have in my "IN/OUT" button menu.
please help
thanks
hello i have a problem in my mitsubishi meldas l0 showing this message on the board: GX04 CARD (#2) NOTHING.
Thanks for helping me.
Hello i have a problem in my mitsubishi meldas l0 showing this message on the board: GX04 CARD (#2) NOTHING.
Thanks for helping me.
Hello good afternoon
Someone has the method of sending the files through the floppy, I only have the floppy disk of my computer's parameters, but I can't find its floppy so I have no idea where it is connected or where it goes or someone would help me,
[email protected]
thanks
Hello friends. I have a cnc kryle vmc700 machine with Mitsubishi Meldas 322 control. I have not been able to find its parameters for more than a year. The cnc machine has been off for four months and the floppy disk related to my parameters has disappeared and I am having a lot of problems. Please email me if anyone has floppy disk parameters.
Thank you very much for your help and guidance.
[email protected]