Stone machines???? anyone?
hi im a new guy here,, just wondering if we can get our own section for stone machines?
is there anyone else here that runs a stone machine?
i used to run a c.m.s. brembana (fanuc)
now im running a A.G.M. intermac 1500 open top and im looking for some help
because im a little miffed,,,,,,
anyway thanks and hope that some people respond to this
"seabee"
Re: Stone machines???? anyone?
gem stone machine is godd
Re: Stone machines???? anyone?
gem stone machine is godd
Re: Stone machines???? anyone?
Hello.
Same problem here with brembana cms speed 3 stone machine & fanuc 21i-MB controller
shows 489 alarm ( coupling failure ) and needs an M code to reset it.
In reality coupling does not failed but this alarm generated due a mechanical maintanance because of some water leakage.
M month+day+100 is works for osai controllers not fanuc.. what is the correct M code for fanuc ?
Re: Stone machines???? anyone?
Quote:
Originally Posted by
mrsa
Hello.
Same problem here with brembana cms speed 3 stone machine & fanuc 21i-MB controller
shows 489 alarm ( coupling failure ) and needs an M code to reset it.
In reality coupling does not failed but this alarm generated due a mechanical maintanance because of some water leakage.
M month+day+100 is works for osai controllers not fanuc.. what is the correct M code for fanuc ?
Hi mrsa,
1) calculate month + day + 100
2) Go into the MDI Mode, write eg. #1134=120
3) restart