Hello guys
I’d like to work with SL20 and a rod gripper.
What is the last line that starts the program over and repeats it e.g. 30 times?
Does anyone know it?
M97 or M98?
Thanks in advance
Printable View
Hello guys
I’d like to work with SL20 and a rod gripper.
What is the last line that starts the program over and repeats it e.g. 30 times?
Does anyone know it?
M97 or M98?
Thanks in advance
If you write M99 instead of M30 at the end of your program, that it’ll run until you’ll stop it.
If you want it to be repeated 30 times, you may declare it with parameters.
The second method is with M97. You have to put your program into a subprogram and then write:
M97P1L30 (call subprogram1, repeat 30 times)
Greetings
Thanks a lot for the information!
What parameters have to be set for 30 times?
And what is the end line?
Thanks
Hello
This is an example.
The program has been working for years.
Program with a multi-purpose tool.
Greetings
%
O00008 (RADIUS-STOESSEL SK0251 ABSTECHEN)
(STANGENMATERIAL 1520MM ABLAENGEN)
(ANSCHLAG 25MM VOR BACKEN)
M36
M97 P10 L10 (ZYKLUS FUER 10 TEILE)
M37
M30
N10 T101 (RADIUS ANDREHEN)
G50 S1500
G54 G90
G96 S200 M03
G00 X24. Z0.
M08
G00 Z-4.5
G01 G41 X22.5 Z-3.464 F0.12
G02 X-1.5 Z0. R20.
G01 Z1.
G40
M09
G00 G53 X-200. Z-450.
M05
T11 (STANGENGREIFER & ABSTECHEN)
G54 G90
M19 P185 (SPINDELSTOP M.ORIENTIERUNG)
G00 X0. Z1.
G98
G01 X-60. F1000. (GREIFEN)
M11 (FUTTER OEFFNEN)
G01 Z140.4 F5000. (RAUSZIEHEN FUER 136MM)
M10 (FUTTER SPANNEN)
G01 X26.
G99
G00 Z0.5
G96 S35 M03
M08
G01 X5. F0.06
X-1.5 F0.03
G00 X24.
M09
M05
G00 G53 X-200. Z-450.
M99
%