6amp 60v 10 microstep bipolar drive

Quote:

---

Originally Posted by tivoidethuong

i was try with H500 verilog code with emp240, it work well

EPM240 evelution board i was use
Attachment 350646

---

Working from a dev-board is a good starting place as you can move pins around easier than remaking a PCB.

Do you have a working driver with good results or just getting the code working on the dev-board?

Quote:

---

Originally Posted by websrvr

Working from a dev-board is a good starting place as you can move pins around easier than remaking a PCB.

Do you have a working driver with good results or just getting the code working on the dev-board?

---

code work well, i dont have time to finish layout

to websrvr
point 2 point test, I have not started layout yet

Attachment 363000

https://www.youtube.com/watch?v=nTvYK4T5MBE

this is a quick drawring EMP240
i believe it works well with the H bridge in previous topic