Original DNC cabling - Mazatrol CAM M2 on Mazak VQC20/50

Dear All,

On my new VQC20/50, the original DB25 female DNC plug has been replaced by a RJ45 one.

Since there is no official standard for cabling EIA-232 on RJ45. Does someone know the original cabling for finding for the correct PC wire map?

This are some picture of the plug (front view/ rear view and sticker showing wich card are used)
http://img847.imageshack.us/img847/6...n1225cl.th.jpg http://img213.imageshack.us/img213/4...cn1221f.th.jpg http://img708.imageshack.us/img708/3...cn1227j.th.jpg
Also what is the switch -wires SDC1 or SOC1- on the top right of the door?

Am I mistaken, or is the original wiring for the DB25 plug still in place?

Quote:

---

Originally Posted by txcncman

Am I mistaken, or is the original wiring for the DB25 plug still in place?

---

You may have right I zoomed on my picture (wich is at least 3x more clear that in the machine) it seems to have 2 spacers, perhaps it is only an adapter screwed on the original DB25...

Tomorrow I'll disassemble