Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503
Hello,
I am looking for ( without sucess so far ) steel suppliers that sell plates/bars with these dimensions (minimum values)
Steel Type Thickness/Height (mm) Width(mm)(minimum)
1.7225 55 300
1.0038 (S235JR) 65 300
1.0503 (C45) 35 300
I am also looking for supplier of AW-6060
Thickness/Height (mm) Width(mm) (minimum)
AW-6060 60 300
Thank you for your help,
Jorge
Re: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503
None of those thicknesses are standard.
1.7225 is close to 14ga (1.897mm)
1.0038 is close to 18ga (1.214mm)
1.0503 is close to 18ga (1.214mm)
Just get them sheared to size
''I am also looking for supplier of AW-6060''
6060 aluminum should be available in common sizes. Where are you located?
Re: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503
I think Calvind Dude may have what you need.
Re: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503
Hello,
I should had specified this before: I am based in Europe.
We are looking for thick AW-6060 plates : 40mm onwards.
Thank you.
Jorge
Quote:
Originally Posted by
Jim Dawson
None of those thicknesses are standard.
1.7225 is close to 14ga (1.897mm)
1.0038 is close to 18ga (1.214mm)
1.0503 is close to 18ga (1.214mm)
Just get them sheared to size
''I am also looking for supplier of AW-6060''
6060 aluminum should be available in common sizes. Where are you located?
Re: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503
IF you are finding about better service in manufacturing options the OEM vs ODM is the better option to guide you step by step. This blog will help you to put your own setup in any kind of services in manufacturing.