LEADWELL LTC-15 Fanuc 0T Parameter loss

Hi,

Lathe machine Leadwell LTC-15 Fanuc 0T (parameter 0~9xx)
Parameter loss.

Can you sent me for parameter list or not?
Please help me too.

My e-mail : [email protected]

Thank you.

message sent!

Hi there
I have LEADWELL LTC 30 LATHE. We lost all parameters. Can you please send the parameters

Email. [email protected]

You will need to obtain them either from someone with the same machine, or the OEM/MTB.
They are unique to that build of machine.
You will also require the 9000 option parameters.
Al.

I am putting together a parameter list for 0T's that will get you started. They will need to be edited to suit your machine. They will not include option paramaters.

is nice to see that someone is involving to help ,but i want to say to you my friend that if you do not have the diagnose that include the PMC paramters with counter,timers,keeprelays,you will never operate the machine ,even if you have the option paramters that are not hard to set on a Fanuc 0 M/T controller.
i also say there is also a possibility to discover all PMC paramters from reading and study the ladder but that is only for models C that are displaying the ladder,on A and B models only if you have it printed.
Good luck.