Hyundai HIT 15s/error 9161
Hello, i am trying to troubleshoot a 9161 (machine not ready) alarm on startup. I've followed the fault tree and even replaced a thermal 24vdc contactor in the circuit, but still no help.
If anyone has ever had this alarm in the past, what steps did you take to correct? Also, if any available documentation, that would be helpful too.
Thanks
Andy
Re: Hyundai HIT 15s/error 9161
I just got this error too. It is not listed in my book. What manual are you looking in that lists it and shows a trouble tree? I need to get that book.
Re: Hyundai HIT 15s/error 9161
Fixed, at least for now. Pressed a reset button on the keyboard circuit board under the monitor. Now we see it it happens again.
Re: Hyundai HIT 15s/error 9161
Quote:
Originally Posted by
BNR_RANDY
Fixed, at least for now. Pressed a reset button on the keyboard circuit board under the monitor. Now we see it it happens again.
My original post is about all the help I can offer. Its from the instruction manual that came with the lathe.
Ken
Re: Hyundai HIT 15s/error 9161
which book is that? Title, publication number? Is it a Hyundai or a Siemens book? Mine books do not have this error in them.
Re: Hyundai HIT 15s/error 9161
Quote:
Originally Posted by
BNR_RANDY
which book is that? Title, publication number? Is it a Hyundai or a Siemens book? Mine books do not have this error in them.
Again, it is the instruction manual that came with the lathe. The manual has 9 books and one of the books lists the alarm codes. The alarm code book has the following info:
Hyundai 1996 All Rights Reserved
Subject to change without prior notice
Page No. : 2-39
Rev No. : 2(9612)
Book No. : Z99HP110100
If you need the latest revision you can call the Operation Center of
Hyundai Precision or Regional Office
Please send request to
Hyundai Precision & Ind. Co., Ltd
Operations Center
1162 Tower Lane
Bensenville, IL 60106
Tel 7089-596-4587
Fax 708-595-0697
This information is from 1996 so its validity is questionable.
Ken