Printable View
If anyone here has the Dynacnc dyna4000 controller on a router or plasma table, (preferably 4x8) (not Tom Caudles CandCnc setup) If possible I would like to discuss your configuration settings . I have had to reduce the motor settings drastically in the files dyna sent me to get the table to move consistently and would like to see others settings who have their tables working. You can PM if you like to discuss offline.
Thank you in advance to anybody who can help.
Bill
Sure Bill: You can download the configuration files right off of our web site for FREE! They are the same ones that over 500 other DynaCNC machine users are using without problems on the same type of tables that came from us. They work great! They are just like yours!
David Cress
DynaCNC
Your so very welcome!Quote:
Originally Posted by lowpull
Your concern is touching. But a person with one of your machines sent me information that helped.
So glad someone could help you.Quote:
Originally Posted by lowpull
In another thread in the dynacnc forum the following offer was made. (see image) Since that part of the thread has somehow became lost I thought I would repost.
So far the only offer I have is from china, but I would rather not ship overseas.
Thanks Bill