Any one out there have gcode for a AR-10 80% milling operation?
I prefer TXT files.......but maybe someone can help.
Thanks,
Mike:)
Printable View
Any one out there have gcode for a AR-10 80% milling operation?
I prefer TXT files.......but maybe someone can help.
Thanks,
Mike:)
Hmm, mine is coded for a dynapath. If I have time this weekend I can write some generic g-code. It's not that hard, you can find a blueprint online. Though without a tool list to know carbide or hss em, # of flutes, etc. the feeds and speeds are useless. Also fixture offsets and tool numbers,etc. Sometimes it's harder to fix someone else's work than just do it yourself.Quote:
Originally Posted by machinist505
- - - Updated - - -
Hmm, mine is coded for a dynapath. If I have time this weekend I can write some generic g-code. It's not that hard, you can find a blueprint online. Though without a tool list to know carbide or hss em, # of flutes, etc. the feeds and speeds are useless. Also fixture offsets and tool numbers,where is program zero, etc. Sometimes it's harder to fix someone else's work than just do it yourself.Quote:
Originally Posted by machinist505
I have mine :) and it`s a mirror finish, unlike the original M4A1 Lower which had some scratches on it. I can code it for you if you want :) this is only done by a CNC 6040 with a 2 flute carbide bit, 8mm wood router @ 24K RPM
https://www.cnczone.com/forums/attac...d=395274&stc=1
https://www.cnczone.com/forums/attac...d=395276&stc=1