DIY QTC for HF 8X12" Lathe??
Hello,
Can anybody tell me if someone has created a QTC mechanism for their mini-lathe and documented it well? I don't really want to spend 100$ on something that I could machine for much less and get the satisfaction out of..
The tolerances don't really seem critical for it, so it seems like a promising project :D
Steve
My two cents, first post.
I had both the ‘hobby’ size and series 100 in shop and the comparison lead me to use the 100. The hobby size was just too small and weak looking.
I followed these methods:
http://www.fignoggle.com/machines/8x...Phase2QCTP.htm
http://www.cnczone.com/forums/showthread.php?t=19812
I did not worry about altering the cross slide, as Littlemachine shop sells them for a reasonable price.
I had to have the work done elsewhere, and am waiting to try it out.
I did try to contact Lathemaster, but he will not respond by phone or email. We last spoke before Cabin Fever, and he seemed fine. I hope he is well.
Selden
PS: I'd love cutting speed and depth advice for the LM 8x12, as I have no formal training, and don't think I'm getting as good results as I should, both in depth of cut and finish quality. Thanks.