Nakamura-Tome TW-20 with Fanuc OT-C lost parameters
Hi all,
Major problem as you see. No parameters and no back-up in house. The machine is an auction buy, about 21-22 years old.
The communications were trying to be set up and when I started machine in morning alarm 101 P/S was active.
I have no alarm manual, but found out that this is for power interrupt during memory write(?)
Was told to press "delete" + "reset' during power up to clear...now 2 more alarms #417 and #427 which represent 'x' and 'z' axis DGTL PARAM.
Now have no parameters and can't move machine or do anything. This is for main spindle only....right side sub spindle appears okay.
If anyone has parameters and/or alarms manual I would greatly appreciate any and all help.
Parameter hard copy are also missing from machine.
Thanks in advance for your help, I'll keep you posted.
Re: Nakamura-Tome TW-20 with Fanuc OT-C lost parameters
Hi
I too have a Nakamura TW20 twin spindle lathe and its working fine
Have you got the Parameters
I can share the parameters
and
Do you have the Operator and machine manual
If yes could you please share me a pdf copy of the same
It would be of great help if i can get the manuals
Thanks and Regards
Hemanth
Re: Nakamura-Tome TW-20 with Fanuc OT-C lost parameters
Quote:
Originally Posted by
krishnanhemanth
Hi
I too have a Nakamura TW20 twin spindle lathe and its working fine
Have you got the Parameters
I can share the parameters
and
Do you have the Operator and machine manual
If yes could you please share me a pdf copy of the same
It would be of great help if i can get the manuals
Thanks and Regards
Hemanth
Hi , I want to talk about tw-20 , I am buying it second hand and wanted to know all about it so can you send me all details you have about the machine it will be of so much help and if you can please give me your contact as I really need some help , i am just starting off with CNC machines and this will be my first machine.
Re: Nakamura-Tome TW-20 with Fanuc OT-C lost parameters
Quote:
Originally Posted by
krishnanhemanth
Hi
I too have a Nakamura TW20 twin spindle lathe and its working fine
Have you got the Parameters
I can share the parameters
and
Do you have the Operator and machine manual
If yes could you please share me a pdf copy of the same
It would be of great help if i can get the manuals
Thanks and Regards
Hemanth
Hi. We recently bought a Nakamura tome TMC-30 - 1989 at a sale. According to the FANUC OT-C instruction manual (0662-08 SERVO download: 9030-10 PMC: M024-A5). There is no copy of the parameters.
Help, send ([email protected]) your parameters to check our parameters. Do you have a wiring diagram of the machine and a ladder diagram (with explanations on paper)?
We had errors 310/320 - they fixed them, but the error on the left side of the machine is NOT READY, not sure what is correct (I connected the 24V wire on the wire feeder connector to the E-STOP button. Now we go without errors, but it does not work in automatic mode - it seems that the rod feeder is not so simple ... Can someone tell me how to turn it off in the program? is it enough to change the parameters or do you need to change the plc?
Best regards, Vladimir