Meldas 64 control, dnc, memory, info..feeler vmc , fairfriend .

hi, I am looking for info on DNC or mem increase on an old Meldas 64 control.. Feeler VF1600 milling machine...

Meldas 64-B, 64S, there is no add on memory feature. There is cassette HR437 which helps, with add on memory but you need to check with Mitsubishi for the same.

DNC parameters you would get in the feeler machine manual.

so far I found this...https://www.ebay.com/itm/haas-USB-FL....c100005.m1851

also looking to dnc with easydnc,