It seems to me that you need to add a little frivolity here. What are your hobbies? Confess)) I like to fish in salt water and cook a little (according to my mood). What about you?
Printable View
It seems to me that you need to add a little frivolity here. What are your hobbies? Confess)) I like to fish in salt water and cook a little (according to my mood). What about you?
My hobby is fishing. Last summer I went fishing and experienced a great danger. I didn't know how to catch a catfish. The catfish pierced my finger and I had a fever of about 102 degrees for two days. Since this is my hobby, I can not leave it.
Afterward, I searched online for this issue and found nothing. Finally, I found an article written on this. I never thought i would find such an article on the internet, now i have a new hobby, And that is gathering such odd resources written on fishing.
If any of you is interested in my finding you may check this article.
https://theblackurbantimes.com/how-to-hold-a-catfish/
I don’t have much time after studying to make my hobby any tangible. The maximum that I can now play online games or entertain myself with numerology like this - https://www.sunsigns.org/angel-number-811-meaning/ Almost all of my free time is spent studying the learning material. It may be easier next year. Need to ask the numbers))
I love high-end sound, music lover, quality music
Hello.
I´m fan of cooking. I must say that I have my guinea pigs in two of my grandchildren. They appear to like some of my recipes more than the way their mother cooks them. What a better incentive than that.
I remember an old webpage by the name COOKING FOR ENGINEERS. It had recipes like "CHICKEN A LA V8, COOK WHILE YOU DRIVE HOME", "TEMPERED STEAKS" were you where given directions on how to use an annealing furnace to cook stew.
I should still have some of those recipes somewhere.
We used to try some at the shop during our Saturday shift. Being in the middle of nowhere left us little choices than to either take some food with us or to cook our meals using electric grills.
Given the temperatura and humidity of the zone where the shop and factories were located it was very common for our meals to get spoiled so we ended up trying some of those crazy recipes. It also gave us the bonus of helping us relax and get to know each other better.
Later on the general manager forbade us from using the furnaces and authorized a small dining room and a kitchen but still we could manage to use the annealing furnace specially for some "charbroiled" meat.
I really miss that time.
Regards.
Flying
https://uploads.tapatalk-cdn.com/202...6d58afc0fa.jpg
Sent from my iPhone using Tapatalk
I spend a lot of time at home working for one SEO agency so when I have spare time I just hang out with friends or listen to a podcast and walking alone. I also love online education and I spend a lot of time learning Chinese. Maybe one day I'll move there. It's a nice country btw.
https://i.ibb.co/34Zqq4N/china-visa-...quirements.jpg
Actually my main stream hobby is to getting participated in forum discussions and also travelling and exploring different places
My hobby is CNC, especially to make old CNC machines come to live again, that is so exciting and super satisfied.
This thread should be used for introducing and talking about your hobbies, but not for advertising please. the mods are deleting all posts with commercial links!
Thanks!
I love meditation and yoga
My favourite hobby is playing snooker and At weekends I sometimes go to a disco or to the cinema.
I like hiking and reading news about celebrities, something like this
https://news.amomama.com/171354-all-...e-vanessa.html. It doesn't require lots of brain cells and it's relaxing.
I like trading. This has become my favourite hobby when I was on lockdown. https://www.trustpilot.com/review/instaforex.com platform is really good for participating in contests.
Bench modeling, first you build a model, it can be: a tank, an airplane, a ship or a car. Then the airbrushing of the model is just a thrill! the model becomes voluminous and looks like a real one.
My Hobby is Cooking.
Thannks
Hi Am Lyle Capetown S Africa and busy retrofitting 6 cnc commercial machines as a hobby , but would like to connect with others have the same passion
my email is zs1uok at gmail.com i tried you web page but it does not exist
There is a bit i need to find out ect in the meantime i have been sourcing all the new servomotors drives and controllers ect
I have some software but there too need some advice reg All lyle
I love learning foreign languages, now I am learning Arabic through a mobile application, plus you can meet other people.
going out for a run or doing workout on heavy bag is my favorite routine.
I like to play chess. I recently signed up for a chess club
Cooking
Traveling
Fishing
Singing
I'm trying to keep it simple so I am sailing [emoji4]
Singing
Dancing
Swimming
Cooking
This thread is only for discussing about your private hobbies. Please don´t post any commercial links. Thanks.
I'm a retired engineering person.....that is, I've been in many fields of engineering but now I spend most of my time re-organising my garage workshop to make more room for things I want to make, but every time I go out there to make more room I just seem to move stuff around.
My latest hobby is building a 3018 mini router from the ground up to make it perform miracles as opposed to just scratching on wood etc........in effect it's a big boy's Meccano set as it's constructed from bolt together extrusions etc but has potential if done correctly.
Now, after 40 years of sitting in a corner gathering dust, I've just rebuilt a small jig borer to make it perform as a manual mill......it basically is a vertical mill but had a 2 Morse spindle so that was one reason it never got into action........now it has a spindle with an ER32 chuck on the end as I only use it for small work and all my plug in tools for it are now 20mm straight shank.
That means I can use all the cutters straight in collets in the spindle and with a 20mm straight shank for other tools like drill chucks, boring head and a slitting saw arbor.
One problem I encountered and that was it had a quill, so I kept that for drilling only and now use the main head casting for the Z axis move........it needs to be re-engineered to get a DRO on it as the dials are all Imperial.
I already have a CNC mill so I don't need a second one.
Ian.
My main hobby is keeping my 1926 Aveling and Porter Steam Roller on the road!! Not much CNC used to build this old girl, just good old fashioned Victorian engineering that is as good today as it was 96 years ago.
https://www.instagram.com/p/CCy5juFj..._web_copy_link
I like programming, but only silly or whimsical programs. The second I sit down to make something "practical" I lose all interest.