If you have a QWERTY keyboard attached, keep tapping the Delete key as it boots. The keyboard can be plugged into the purple socketon the CPU or if the cable is connected, into the back of the console.
Printable View
If you have a QWERTY keyboard attached, keep tapping the Delete key as it boots. The keyboard can be plugged into the purple socketon the CPU or if the cable is connected, into the back of the console.
Got it to work
Many Thanks Bloke I owe you good.
The HDD Settings were the correct ones. It booted up nicely.
Here is a link to the machine doing the warm up.
https://photos.app.goo.gl/EuQo6XWCQp2Zew617
But now i got into a different problem.
My previous WiFi connection to the machine via a WiFi router its not working.
The ISA card gets recognized by the system.
I can access the Network parameters function on the control
Apparently there is connection. the card shows blinking leds. Can you interpret tihs blinking leads?
I can connect to the router wifi , but cannot connect to the Machine.
since i got home, i am wondering if there is also some function to activate the Ethernet card on CMOS.
It was working perfectly before.
Link to a video:
https://photos.app.goo.gl/aRnfdJsCXD6AcqeM7
Maybe my router its not working correctly? I notice that the power button is flashing.
But i can connect to him correctly.
Tommorow i will bring the laptop and see if i can connect to the machine.
rgds
Driving everyday 100km to accomplish nothing gets very depressing.
Unfortunately i could not get the network to work. It was working before flawlessly.
All equipment is on the same subnet/ip range and still cannot connect. Tried to connect with laptop and nothing.
Could it lose something in the BIOS? Need to configure some RQ settings in the BIOS? Since HDD was not recognized before i wonder.
Please someone help. It seems i am Clueless here.
Hi, I’ve been working away for a couple of days but I’ll be back in the office tomorrow. If you PM me an email address, I’ll send the complete BIOS settings for your machine tomorrow. There are some that relate to IRQs that may stop the network card being seen.
Hello Bloke.
I have pm you.
If you did not received pls say so.
rgds
Valter
Nothing yet...
Humm..
I have tried to request a add as a contact you.
I have done the same but it says you are not allowing private messages.
or send a PM to Roooster on the other site.