-
Hello everybody
I am interested to know if there are in general separate piece counters for CNC machines that connect to the machine over an M command/ additional command over the control desk or even over the machine’s piece counter?
I need it to adjust piece numbers for tools that were used on the machine.
A good example would be our STAR ECAS 20- it has a piece counter for each tool memory, that means that after an entry of e.g. 100 parts, the machine stops and tells to undertake a tool change.
Is there a new software for Tornos Deco20 – 26, that eliminates my problem or does a separate piece counter exist that I can connect to the machine?
I would appreciate any other suggestion.
Kind regards
N.Huck
-
We had the problem on a Miyano BNE with 30i controller- there was no tool life for the machine, 2 revolvers with 12 stations.
I have deleted it over a subprogram with M command call at the beginning of the program and use the #100-#149 variables. That works without problems- however you need exactly the #500s variables free so - that the values are still existent when turning the machine on and off.
Is the STAR with linear carriage and one revolver?
-
Hi,guys. I have bought used Tornos Deco 2000/20 y.m 1999 and I`m looking for any manuals. Can somebody help me? Thanks in advance.
