It's just an M32 for the front working and an M34 for the backworking. Delete it out of your program and it'll run just fine.
Printable View
I entered those M codes in MDI mode to test and set up the Detectors. I thought they were all set and added what I thought was the right code in the .part but when I couldn't get the part pgm to run with them I took out the code but the check remains and alarms the machine out.
I'd like them to be in the program, it's a spot, drill, tap sequence in both front and back operation. Would you advise me on the correct implementation to check for drill breakage, possibly part presence?
It would be greatly appreciated.. Buying a used Tornos as my first cnc machine has been like being left on the moon as far as the amount of help there is online in forums. And unfortunately the help files within TB-Deco are not very, uh, helpful.
I found that I in fact did leave an M35 in the program which I took out... I would still like to implement them correctly so any help would be great. I'm not sure where exactly I should place the M's and which ones/order. I had M35/G4 in the part ejection icon at the bottom.
Hey all,
Im looking for a programming manual, program examples, or any training/reference materials for almost any newer Tornos machine (lke 2004 or newer).
Any help is appreciated. PM me and ill send you my email.
Thanks
Hi,guys. I have bought used Tornos Deco 2000/20 y.m 1999 and I`m looking for any manuals. Can somebody help me? Thanks in advance.
Hello Everyone!
I'm new to this forum, but hoping a huge help! We've got a Tornos ENC-264 (From earli 90's) with a Fanuc 0-T. We've got a manual for it in German, but i only speak english (even if it's not correct). I couldn't find anything on that manual regarding to measuring geometry. On channel 1, Tools are only measured in "Z", all X geometries are 0.00mm. On channel two i can see all tools geometries has X; Z coordinates. I've never used this machine before, only other fanuc 18-21 and mitsubishi controllers. I tought if i touch my tool nose to a bar, which is in the collet, and measure it, then go into Offset/Geometry, put for eg. X16.00 i get the measure software key, hit it, then all done. But there is no measure button arise. So i tried in another way, i saw in this forum, that on Fanuc 0-T i can hit MX10 then input, still does nothing. I'm lost. Does anyone have an english manual for this machine, or does anyone have any idea how to get the tool geometries either in X; and Z directions? Any help would be greatly appreciated!
Hello Tornos doc! I've got an issue with my ENC-264. The problem is, at the begining of the program, when the cutoff tool makes a clear cut, the main head supposed to go back, with open collet (In Z direction). But instead it goes right towards the tools (with open collet), and an error code arise (It's in end position -Z), so i can not produce anything. Do you have idea, how to get it back to work?
Header Looks as:
G161 A16.0 B0.03 C0202 F-92.0 h3.0 I0 K1 J1 M40 Q0 R50 S600 T1800
This program was good for more then 2 years, and all of a sudden Head1 got crazy. I hav no idea what happaned.
Thanks.
I've a problem with my g952 macro. i cant seem to control the position of the eccentric. any help would be awesome
G952 P1=8 P2=0.5 P3=-14,6 P4=10 P5=1,4 P6=0.05 P7=0.2 P8=1 P9=2 P10=2 P11=90
Hi!
What is the easiest way to program variable macros to subprogram?
I want to do subprogram what fill e.g variable macro #520 to number 100.
So can/how i do subprogram what i run and then macro is filled?
Also how i can program PMC DGN bit?
I want to program DGN number e.g X0050 bit 2 to 0 or 1.
Can i do M or G code of that?