Mini mill base/xy table question

I recently got a great deal on a mini milling machine with a ton of goodies with it. The only minor issue that it does not have a base/X-Y table. Little machine Shop is backordered and I am waiting for a reply as to when they may have them back in stock. Would it be possible to get a flat steel plate such as 3/8" thick and then bolt the machine down to it with 123 blocks. Then bolt down a table such as this
http://cgi.ebay.com/COMPOUND-SLIDE-M...QQcmdZViewItem
or
http://cgi.ebay.com/6-HORIZ-VERT-ROT...QQcmdZViewItem
in front of it? Hopefully that makes sense to some of you folks that run mills. If not I can re-explain it. Thanks for any help you can offer. akraven

Either of those would not seem to work. Could you explain more what you bought or could you provide a picture(s). If you can purchase the new upgraded table for the mini mill. Thats what the post about the MY CMPLETE X2 SETUP is all about. Its discussing the pro's and cons of the x2 if that is what you indeed have.

I have the head and column but not the base or x-y table. My column looks like this http://www.littlemachineshop.com/pro...ProductID=1766 with that green bracket on the bottom where the 3 bolts go. The previous owner sold off the base and x-y table like this one http://www.littlemachineshop.com/pro...ProductID=1765. Hope that makes it clearer. akraven

Try looking asking here http://www.cnczone.com/forums/showthread.php?t=24879
You could buy one of these or maybe get someone who is buying to sell you their base.

Mike

Thank you for the info Mike. That base is a little out of my range but the idea of finding someone who bought one and wants to get rid of the old one sounds good. Thanks again. akraven

doing what you suggest in post 1 will work fine
http://www.pathcom.com/~vhchan/cnc/cnc.html
this may inspire you.
mike

How about this?



http://www.arceurotrade.co.uk/en-gb/dept_116.html





.

Thanks Mike Jeffers that is exactly what I had in mind! I will bookmark that for reference. Thanks again. akraven

Switcher those look great. If I can find a US source with that much choice it would be great. Shipping from the UK would be a bear ! Thanks akraven