Mitsubishi Meldas M600 data reload
Hello,
We are working on a Mitsubishi MV-5C VMC with Mitsuibsihi M600(FCA610MT) controller.
Machine was working okay 5-6 days ago.
3 days back machine battery became low and the parameter are now gone.
We have complete backup of machine in hard and soft copy. There is no hard disk or memory cassette(CBUS#2) in the backside of controller.
Backup files include:
USER PARAMETER
MACHINE PARAMETER
SYSTEM PARAMETER
PROGRAM.....etc.
Now we are trying to reload the data.
we are able to reload user and machine parameter via RS232 but we are not able to load system parameters.
After reloading user and machine parameters machine screen shows only X-Axis on Position display and in all the parameter screen.
Machine Ladder logic is there in the machine.
Is there special step by step procedure to reload the parameters.....?
Re: Mitsubishi Meldas M600 data reload
Are the option parameters available ? O parameters ?
Re: Mitsubishi Meldas M600 data reload
Try disabling edit lock b and c and then load the system parameters.
Re: Mitsubishi Meldas M600 data reload
Hi,
There is only lock B. I have already tried that lock.
In manual also it is written that you can take system paramter backup but you can not load back to machine.
Sent from my SM-G950F using Tapatalk
Re: Mitsubishi Meldas M600 data reload
Quote:
Originally Posted by
jjautomation
Hi,
You need machine SRAM Backup then only you can reload the machine. This method is applicable for M600 only. M60 uses ALL1, ALL2,ALL3 files to reload
change sram.bak to sram ?
so can I simply put a parameter list in the hard drive and what folder would I put at?
Re: Mitsubishi Meldas M600 data reload
Quote:
Originally Posted by
jjautomation
Thanks for the reply..
Option Parameters are available, I think so. When you press option settings key inside Maintenance menu. System asks for password. But there is a sceen to view installed option there it shows 6-7 enabled options.
Hello
Which password should be input?
please guide me.