-
milltronics post
I am looking for an Edgecam post for a Milltronics VMC. We have a few VMC's and I've never got a good post out of Edgecam support. We are operating on a generic fanuc post. Its needs to be for a Centurion 6 or 7 control. Moving to more 3d machining we need a better post. If anyone could help it would be great. Thanks
-
Personally never seen a Milltronics machine before so had to download the programming manual of t'internet.
All the G & M codes look like standard fanuc but some of the extra inputs look a little different (drilling cycles for example, may need format table letter address tweaks).
Use the Adaptive-Iso template to start with and take it from there. If you need any more help then PM me and I'll give you my email address so you can mail me what you've got and I'll help you out. As long as you're on Edgecam version 2010R1, or newer, that is.