Are Chinese servos a gamble? Servos vs Leadshine closed loop
I have read only reviews on Chinese servos 'looking well built' and I want to know if they have a good performance record with anyone.
I want to know this because for my machine with 400w / 750w drives they are the same price as Leadshine hybrids. I think others face this choice.
So I am looking at choosing between proven name brand and Chinese servos.
I read a thread before on the same topic but it devolved into a political / global economic thread.
Example servo, $350
https://www.aliexpress.com/store/pro...760394727.html
Example Leadshine easy servo $300
https://tinyurl.com/yc5mfbbr
Also as sizes go up servos can be cheaper.
As to if 'Leadshine is actually leadshine' you can verify this through them if seller is an authorised distributer.
Thanks for answers I ask a lot of questions but I think I am close to finally ordering my parts!
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
Steppers
Pro
Very simple electronics
Con
Very limited power
Quite limited torque at high speed
If they lose a step, that's it, and you may not be told about it unless your controller is quite expensive)
Servos
Pro
Much bigger range of power available (as much as you want)
Much higher speeds available with torque
If they fault (position error too big) they tell you
Con
Slightly more complex electronics and mechanics (ie encoder)
Higher cost typically
Controller needs tuning
As for brands - generally, You Get What You Pay For.
I use Gecko+servo, and cannot comment on other combos.
Cheers
Roger
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
I've heard that those chinese servo's work well, if you know how to set them up. I've heard that documentation is severely lacking.
I opted for DMM servos, as the price is only slightly higher, and they have better documentation and support. They would probably be much more expensive in Australia.
Comparing an AC Servo to the Leadshine "Easy Servos" is comparing apples and oranges. The AC servos are much more powerful. The Easy Servos are still stepper motors, with a torque curve that drops off as rpm's increase. AC servos have a flat torque curve, up to 3000 RPM
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
The dmm tech 400w servo and a dyn2 drive come in at around $285, thats around the same price as the chinese servo systems. I would tend to trust a brand that provides warranty and documentation on their products as opposed to a FOB china product with little or no support. If you fry one of those chinese drives you are on your own, I have read of DMM being able to repair or providing at cost replacements.
I was just looking at those chinese drives/servos for a retrofit im planning and I honestly see no cost benefit for them as opposed to DMM Tech products. The shipping from china typically makes them about the same price, at which point I lean heavily twords DMM.
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
Quote:
The dmm tech 400w servo and a dyn2 drive come in at around $285,
You need a DC power supply for those, so expect to pay about $60-$75 per motor for that. The 200V motors with Dyn4 are about $100 more, but don't require the power supply.
And don't forget cables, which can add another $50-$100 per motor.
DMM sells a complete kit of 3 400w/Dyn2 for about $1450, which is a lot more than $285 per axis.
I agree about the chinese pricing though. The shipping brings them right up to DMM's pricing. What the DMM's have going for them, is that they are about $150-$250 cheaper than anything else not made in China.
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
Quote:
Originally Posted by
ger21
You need a DC power supply for those, so expect to pay about $60-$75 per motor for that. The 200V motors with Dyn4 are about $100 more, but don't require the power supply.
And don't forget cables, which can add another $50-$100 per motor.
DMM sells a complete kit of 3 400w/Dyn2 for about $1450, which is a lot more than $285 per axis.
I agree about the chinese pricing though. The shipping brings them right up to DMM's pricing. What the DMM's have going for them, is that they are about $150-$250 cheaper than anything else not made in China.
Thanks for the info! Yes, you are correct, multiply the price by 1.33 (Aud to USD currently) then add more for shipping for DMM (for us Aussies). So prices are less for Chinese.
The Chinese servos come with cables too which to me is an advantage. Do they also require a power supply or not? I am yet to investigate the wiring setup required. I think I could work out setting them up with help from electronic engineer friends and some (lots) of reading.
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
If you fry one of those chinese drives you are on your own,
Contrast this with the guarantee from Gecko on their latest drives: you fry it, we fix it, for free.
In fact their Viper Drive, the 203V, survived an open challenge a year or two ago.
Good support (from any company) is $$$ in hand.
Cheers
Roger
(I am quoting Gecko because I use them; I have no connection to them.)
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
Quote:
Originally Posted by
j3dprints
Thanks for the info! Yes, you are correct, multiply the price by 1.33 (Aud to USD currently) then add more for shipping for DMM (for us Aussies). So prices are less for Chinese.
The Chinese servos come with cables too which to me is an advantage. Do they also require a power supply or not? I am yet to investigate the wiring setup required. I think I could work out setting them up with help from electronic engineer friends and some (lots) of reading.
Don't go by the price, go by what you are getting, compare the packages, you won't find any in this price range, that will equal the Dmm system, just there encoder advantage, makes them superior to any one else
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
Quote:
Originally Posted by
mactec54
Don't go by the price, go by what you are getting, compare the packages, you won't find any in this price range, that will equal the Dmm system, just there encoder advantage, makes them superior to any one else
The 3 axis DMM kit you guys (US or near) get for $1441 I pay around $2200 AUS for after shipping. There would be additional import costs, unless you broke up the shipping. I think DMM could also work with AUS people on this, they seem like good people.
The chinese servos however I can obtain for around $1100 AUS (that's 3 axis) which I believe offer just as many features as DMM and can be run on high voltage AC. I think they might even have additional features.
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
I think Mactec is referring to the DMM tech encoders 16bit (65,536 ppr) vs the 2500 ppr chinese product.
However if it really is almost twice as expensive, I guess you have to evaluate what tech support, documentation and a industrial encoder are worth.
Re: Are Chinese servos a gamble? Servos vs Leadshine closed loop
Quote:
Originally Posted by
j3dprints
The 3 axis DMM kit you guys (US or near) get for $1441 I pay around $2200 AUS for after shipping. There would be additional import costs, unless you broke up the shipping. I think DMM could also work with AUS people on this, they seem like good people.
The chinese servos however I can obtain for around $1100 AUS (that's 3 axis) which I believe offer just as many features as DMM and can be run on high voltage AC. I think they might even have additional features.
The cheaper Chinese servo's don't even come close as far as features go, it's what you can afford to buy, and what you will be happy with, if a stepper was a thought, then any servo system would work for you and you would be happy with it