Having problems with Cutter path not completing cut (PICS)

Im having a problem getting a 1/4 ball nose emill to go to the exact edges of the part.
It will work great when at 90 degrees. but when I turn the tool to a 45 degree fix. ( for clearance ) the tool doesnt go the the exact edge of the part.
Im still very new to working with cam software. So it could be something fairly easy.

Works fine.
https://i.imgur.com/rGMzopc.png


Doesnt work
https://i.imgur.com/bINavhf.png
ks

Come on... no one can help me with this one? :banana:

Are you using "Tool Center" or "Tool Tip" ? ?

Quote:

---

Originally Posted by SNZO

Come on... no one can help me with this one? :banana:

---

Little information has been provided. On the previous dialogue page, what is set for the "Area type"?

There are also about 9 other things that can control that. Let alone I cant be sure WHICH TOOLPATH Strategy that even is!!!

Zip and post the bbcd file would help.

Quote:

---

Originally Posted by SNZO

Come on... no one can help me with this one? :banana:

---

Are you using any kind of tool containment strategy? If so, make sure it is properly projected while on a tilt. Sometimes it helps rotating the view in the workspace to look at the part the same way the tool will, looking straight down the shaft.