Masterwood 323 '94 post processor
I have a Masterwood 323 from '94, control CN6, FORA 6.23 . I write a postprocessor for this machine ( VCarve ), but is incomplet.I have not any kind of documentation for the machine. Does have anybody a operating manual for Masterwood 323 or another with CN6 (CN10) control ? Or for another Masterwood from 1992 - 1998 ?Best Regards, Walter
Masterwood 323 with CN 6 control
Hi
I work in factory which produces wood doors. I am programmer for all cnc machines in factory.
We have also Masterwood 323 with CN 6 control. It is old machine but very accurate.
I programming machine manual with G-code. Recently I write post processor for Artcam but after generating
G-code is necessary to little alter the code. For this machine is complicated to get clean code.
For now I have not tray with other CAM software. It's complicated to tell you
which CAM is good for you. Tell me for which CAM software you are interest.
Maybe I can help you more or even write post processor for that CAM.
Greetings
Romeo
Re: Masterwood 323 '94 post processor
Anyone in 2021 that can help with some manuals regarding the 323?
Re: Masterwood 323 '94 post processor
Hello, is there a machine master wood project 250 ??
- - - Updated - - -
Quote:
Originally Posted by
jura2020
On weekend I have try to rewrite post processor and succeed. From this post you get a clean code. Origin(zero) are in up left corner yust how is on the machine.
Enjoy, Romeo
Hello, is there a machine master wood project 250 ??