Re: Fanuc 16-W won’t boot
Check the +5V for +-5% variation. If that's ok, you will need to swap certain modules with know good one. I hope that you have a recent backup of your data...
Re: Fanuc 16-W won’t boot
Hi Memoryman, Thanks for the reply. I have checked all of the voltages that I can see on the boards and they are all within 5% easily. I did have an issue with not being able to do an Sram backup when I got the machine a few months ago but Fanuc said I had corrupted memory after I tried a new Sram card. Maybe I need to do a memory wipe and reload everything. I did an RS232 backup of the main parameters and servo parameters. Is there anything else I would need if I wiped the memory?
Thanks
Re: Fanuc 16-W won’t boot
You need PMC parameters as well; maybe hidden programs, such as tool change program.
Re: Fanuc 16-W won’t boot
Hi
Did you find out what the issue was here?
I'm having this same issue. Any help would be appreciated.
Re: Fanuc 16-W won’t boot
Hello Lomach, I have a similar machine Robocut 0B with 16W. I have same issue as you. Can you help me identify which relay you are talking about, Is it one of the two relays with timer on it?
Thank you